A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
judder vibration at 2,000rpm
- GeorgeC
- Visitor
-
Public
03 Sep 2020 18:12 - 03 Sep 2020 18:33 #227687
by GeorgeC
Replied by GeorgeC on topic judder vibration at 2,000rpm
I see this topic is old, however the problem is recurring and may be related to balance.
All the cars worked fine with the old clutches. Fit a new clutch and these problems show up.
Are the new clutch assemblies balanced during manufacture?
Is the pressure plate marked and re-used then fitted on the same mounting holes with the same or new bolts?
Is the clutch plate a good fit to the gearbox input shaft, or is it a little loose with age?
Whether its in The Toilet, The Shower or The Prayer Room, we are all looking for guidance from The Still Small Voice from within!
All the cars worked fine with the old clutches. Fit a new clutch and these problems show up.
Are the new clutch assemblies balanced during manufacture?
Is the pressure plate marked and re-used then fitted on the same mounting holes with the same or new bolts?
Is the clutch plate a good fit to the gearbox input shaft, or is it a little loose with age?
Whether its in The Toilet, The Shower or The Prayer Room, we are all looking for guidance from The Still Small Voice from within!
Last edit: 03 Sep 2020 18:33 by GeorgeC.
Please Log in or Create an account to join the conversation.
Time to create page: 0.119 seconds