Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
What did the postman bring today
- Swifty
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- TomDK
- Visitor
-
Public
Dave cc wrote:
TomDK wrote: Just received this from the UK
Just got me some more winching power
What is it ? a early giggle pin twin motor setup ???
No, it's twin motor conversion done by Flamin Fabrications. An Australian company
www.flaminfabrications.com.au
They been doing it for years, pretty popular down under.
It's very easy to install, but needs a slight modification to the "front" motor shaft. A 3mm deep, 3/8" keyway needs to be cut.
Also cost far less than a Gigglepin twintop, but of course, does not come with different ratios.
Gigglepin sells them:
gigglepin4x4store.gostorego.com/winches-...-twin-motor-kit.html
Please Log in or Create an account to join the conversation.
- Dave cc
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- TomDK
- Visitor
-
Public
Dave cc wrote: Jesus that mist put some strain on the 2nd motors pinion shaft where the drive gear fits
Was my thought as well.
But have never heard of a motors shaft break. So not really something that I worry about
Please Log in or Create an account to join the conversation.
- helijohn
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- DonegalGuy
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Wiltec17
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Caz
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- helijohn
- Topic Author
- Visitor
-
Public
Caz wrote: A bill from the garage as i had a new Heater Matrix fitted
Ouch.
Please Log in or Create an account to join the conversation.
- GuardianAngel
- Visitor
-
Public
I have also ordered some new radius arm bolts from Bits4Vits and I suspect I am going to need to cut the old bolts as they are likely to be seized to the bushes
Please Log in or Create an account to join the conversation.
- TomDK
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
DonegalGuy wrote: Like an EEJIT I ordered the wrong key blanks as I looked at the key the wrong way up but after an email to the supplier they are sending 2 new blanks out to me free of charge or postage costs. Now that's service!
The key blanks are spring loaded and flick out of the fob with the push of a button. I now await the actuator to fit to the drivers door before installing the kit. You even get to choose what logo you want on the fobs so no prizes for guessing what logo I chose
I have that kit for my Mazda Bongo, I don't recall the key having provision for the chip for the immo.
Some Suzukis and a bunch of motorcycles.
Please Log in or Create an account to join the conversation.