A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
What did the postman bring today
- Swifty
- New Member
-
Public
27 Nov 2013 22:34 #93514
by Swifty
Replied by Swifty on topic What did the postman bring today
Cheers Russ at jimnybits!!!!!
Please Log in or Create an account to join the conversation.
- TomDK
- New Member
-
Public
27 Nov 2013 22:48 - 27 Nov 2013 23:02 #93521
by TomDK
No, it's twin motor conversion done by Flamin Fabrications. An Australian company
www.flaminfabrications.com.au
They been doing it for years, pretty popular down under.
It's very easy to install, but needs a slight modification to the "front" motor shaft. A 3mm deep, 3/8" keyway needs to be cut.
Also cost far less than a Gigglepin twintop, but of course, does not come with different ratios.
Gigglepin sells them:
gigglepin4x4store.gostorego.com/winches-...-twin-motor-kit.html
Replied by TomDK on topic What did the postman bring today
Dave cc wrote:
TomDK wrote: Just received this from the UK
Just got me some more winching power
What is it ?a early giggle pin twin motor setup ???
No, it's twin motor conversion done by Flamin Fabrications. An Australian company
www.flaminfabrications.com.au
They been doing it for years, pretty popular down under.
It's very easy to install, but needs a slight modification to the "front" motor shaft. A 3mm deep, 3/8" keyway needs to be cut.
Also cost far less than a Gigglepin twintop, but of course, does not come with different ratios.
Gigglepin sells them:
gigglepin4x4store.gostorego.com/winches-...-twin-motor-kit.html
Last edit: 27 Nov 2013 23:02 by TomDK.
Please Log in or Create an account to join the conversation.
- Dave cc
- New Member
-
Public
- TomDK
- New Member
-
Public
27 Nov 2013 23:05 #93531
by TomDK
Was my thought as well.
But have never heard of a motors shaft break. So not really something that I worry about
Replied by TomDK on topic What did the postman bring today
Dave cc wrote: Jesus that mist put some strain on the 2nd motors pinion shaft where the drive gear fits
Was my thought as well.
But have never heard of a motors shaft break. So not really something that I worry about
Please Log in or Create an account to join the conversation.
- helijohn
- Topic Author
- New Member
-
Public
- DonegalGuy
- New Member
-
Public
29 Nov 2013 15:47 #93787
by DonegalGuy
Thanks to Member j99pre this arrived all packaged well and even has the protective condom over the odometer reset which mine is missing! Can never have enough protection
:laugh:
Replied by DonegalGuy on topic What did the postman bring today
Thanks to Member j99pre this arrived all packaged well and even has the protective condom over the odometer reset which mine is missing! Can never have enough protection
:laugh: Please Log in or Create an account to join the conversation.
Time to create page: 0.206 seconds