× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

What did you do to your jimny today?

More
16 Feb 2024 14:00 #254374 by DrRobin
Numerous jobs on my Gen 3 including

- Changed the wheels and tyres back to Hankook Dynapro
- Went for a spare tyre (Hankook), but it hadn't come in
- Replaced the Vacuum lines to the front hubs and re-fitted the Vac hubs, all working again
- Refitted the standard leather seats
- Gave it a wash

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Please Log in or Create an account to join the conversation.

More
17 Feb 2024 01:59 - 17 Feb 2024 02:05 #254389 by Filipao
Apio bra on the rear diff 

    
Attachments:
Last edit: 17 Feb 2024 02:05 by Filipao.

Please Log in or Create an account to join the conversation.

More
26 Feb 2024 06:35 #254592 by colejennifer
Taping off a vague Jimny logo on a spare wheel cover. 
The following user(s) said Thank You: Filipao

Please Log in or Create an account to join the conversation.

More
28 Feb 2024 20:24 - 28 Feb 2024 20:34 #254689 by Hughes
Changed out the headlight lenses. Our UV does a number on polycarbonate. Got these off Aliexpress: a.aliexpress.com/_mLcNDa6
Not the easiest to fit, if you're careful the rear shell doesn't get too badly damaged. Can do a quick write up on the process if others are interested. 
 
Attachments:
Last edit: 28 Feb 2024 20:34 by Hughes.
The following user(s) said Thank You: gv42, Filipao

Please Log in or Create an account to join the conversation.

More
29 Feb 2024 14:28 #254694 by DrRobin
Swapped it from a SZ4 to a SZ5.

  >  

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Attachments:
The following user(s) said Thank You: Lambert, gv42, Soeley

Please Log in or Create an account to join the conversation.

More
29 Feb 2024 15:35 #254696 by yakuza
Nice morphing, you should be pleased.

Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.

Please Log in or Create an account to join the conversation.

  • rogerzilla
  • Visitor
  • Visitor
    Public
29 Feb 2024 15:49 #254697 by rogerzilla
Replied by rogerzilla on topic What did you do to your jimny today?
I see Suzuki are still using the same steel for the front hub bolts

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
29 Feb 2024 16:01 #254698 by Lambert
Noice and a bit premium too!

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

  • rogerzilla
  • Visitor
  • Visitor
    Public
01 Mar 2024 12:12 - 01 Mar 2024 17:35 #254721 by rogerzilla
Replied by rogerzilla on topic What did you do to your jimny today?
I went and got it from the dealer.

On level ground, the seat position is actually spot on with the bulkhead in place (I'm 5'10") BUT I think I will need a sheet of stiff plastic or something to prevent chafing of the mesh against the seat back.  Has anyone found anything suitable?

The car is very good - unlike some Suzukis, the  clutch biting point is in a sensible place.  The engine thrums more then in a gen3, where it whines!

Update...I  managed to swap the wheels in between showers.  The locking wheel nuts they use now are horrid.  I have some Trilock ones I think I'll fit instead.

File Attachment:
20240301_173036 by rogerzilla , on Flickr

File Attachment:
20240301_173045 by rogerzilla , on Flickr
Last edit: 01 Mar 2024 17:35 by rogerzilla.

Please Log in or Create an account to join the conversation.

More
01 Mar 2024 19:51 #254741 by Soeley

Please Log in or Create an account to join the conversation.

  • rogerzilla
  • Visitor
  • Visitor
    Public
01 Mar 2024 20:03 - 02 Mar 2024 14:09 #254742 by rogerzilla
Replied by rogerzilla on topic What did you do to your jimny today?
Thanks.

(TPMS query deleted as it's now sorted itself out and is showing pressures.  To start with, I had no warming lights, which was the main thing, but it showed "--" for each tyre even after a reasonable run.  The sensors in the replacement wheels are Hamaton EUPro 3.5 from Jimnystyle and pre-programmed, so they do work).

The new Bridgestone AT002 is a really good tyre, by the way.  Quite knobbly but not noisy at all on the road.
Last edit: 02 Mar 2024 14:09 by rogerzilla.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
04 Mar 2024 13:10 #254786 by Lambert
Today I have mostly been fighting my new titan seat covers into place.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

Time to create page: 0.390 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.