A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Engine G13BB vs. M13A - which one is better
08 Jul 2014 19:22 - 08 Jul 2014 19:26 #119526
by Bosanek
Engine G13BB vs. M13A - which one is better was created by Bosanek
Hello!
I am looking out to buy a Jimny made around in 2001 - 2004.
Therefore, I have encountered vehicles with G13BB engine as well as with M13A engine.
I would like to know which one of those two engines is better in the following criteria:
1. Fuel consumption;
2. Robustness (durability / reliability);
3. Longevity;
4. Complexity of diagnosing faults;
5. Complexity of maintenance and repairs;
6. Availability of spare parts;
7. Cost of spare parts;
8. Performance on-road;
9. Performance off-road;
10. Complexity of applying mods (if any);
I think I broke it down to all the criteria that matter!
Also, how does the M13A VVT engine (the one used from 2005 onwards) compare to regular M13A in the above criteria (especially in fuel consumption)?
I am looking out to buy a Jimny made around in 2001 - 2004.
Therefore, I have encountered vehicles with G13BB engine as well as with M13A engine.
I would like to know which one of those two engines is better in the following criteria:
1. Fuel consumption;
2. Robustness (durability / reliability);
3. Longevity;
4. Complexity of diagnosing faults;
5. Complexity of maintenance and repairs;
6. Availability of spare parts;
7. Cost of spare parts;
8. Performance on-road;
9. Performance off-road;
10. Complexity of applying mods (if any);
I think I broke it down to all the criteria that matter!
Also, how does the M13A VVT engine (the one used from 2005 onwards) compare to regular M13A in the above criteria (especially in fuel consumption)?
Last edit: 08 Jul 2014 19:26 by Bosanek.
Please Log in or Create an account to join the conversation.
- idiotmobil
- Visitor
-
Public
08 Jul 2014 21:08 #119534
by idiotmobil
Replied by idiotmobil on topic Engine G13BB vs. M13A - which one is better
happy with my g13bb had no problems so cant coment on that mpg is crap but im modded so don't count its done just under 70.000 and looks like it hasn't been mucked about
Please Log in or Create an account to join the conversation.
- supergaz
- Visitor
-
Public
08 Jul 2014 21:59 #119539
by supergaz
Replied by supergaz on topic Engine G13BB vs. M13A - which one is better
Both a tough reliable engine if looked after. G series has a belt and M series is chain, more modern engines will always be more economical and also the newer the more power output.
Ive got a M16a liana engine in my jimny which was a simple swap and cheap upgrade. fuel consumption is terrible due to my jimny being very heavily modified.
Ive got a M16a liana engine in my jimny which was a simple swap and cheap upgrade. fuel consumption is terrible due to my jimny being very heavily modified.
Please Log in or Create an account to join the conversation.
- ZookFastback
- Visitor
-
Public
09 Jul 2014 00:21 #119543
by ZookFastback
Replied by ZookFastback on topic Engine G13BB vs. M13A - which one is better
I've only experience with the G13BB engine but I have found it to be extremely reliable and long-lived. Bought it 13 years ago and have just clicked over 390,000 kilometres. Had to replace the head at 375,000 k's but other than that all original. Economy is 6.5l/100 k's. Mine is the Santana-built Spanish version soft top.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9088
- Thank you received: 1818
09 Jul 2014 04:38 #119544
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Engine G13BB vs. M13A - which one is better
Ours is a vvt from early 2011 and now it's run in with 29k on it it goes really well. It gets to 70 promptly and feels like it wants to keep going. Off road it bimbles about nice and steady just as well. Fuel wise I would like a bigger tank so I'm not filling up so often but 45ish quid fills it from the man putting his finger in his ear and does about 12 to 15 days depending on what I'm doing which compared to my 90 for the same volume and use the jimny gives easily one and a half times as much service. Maintenance on the engine has amounted to no more than routine services and it's cheap enough for bits, just a pity that the steering hasn't been able to match the same reliability.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
09 Jul 2014 19:08 - 09 Jul 2014 20:07 #119599
by dirtydogz
2002 JLX Soft Top
Jimnybits 2" lift +Pro Comp ES1000 shocks. Big Jimny rear shock mounts. Big Jimny adjustable panhard rods.
Big Jimny steering damper bracket. Disco Armstrong steering damper. 7X15 black modulars. 205/75/15 Maxxis 743 bravo m/t.Superpro camber correction bushes.Black A bar....
Replied by dirtydogz on topic Engine G13BB vs. M13A - which one is better
All so happy with my G13BB engine 53000 on the clock, my jimny is fitted with a 2 inch lift with 225/75/15 MAXXIS AT 771 tyres and I get about 250 mile on a full tank
2002 JLX Soft Top
Jimnybits 2" lift +Pro Comp ES1000 shocks. Big Jimny rear shock mounts. Big Jimny adjustable panhard rods.
Big Jimny steering damper bracket. Disco Armstrong steering damper. 7X15 black modulars. 205/75/15 Maxxis 743 bravo m/t.Superpro camber correction bushes.Black A bar....
Last edit: 09 Jul 2014 20:07 by dirtydogz.
Please Log in or Create an account to join the conversation.
Time to create page: 0.153 seconds