A section for Vitara and SJ owners.
If you have not yet upgraded to a Jimny then you can discuss your current Suzuki 4x4 here!
If you have not yet upgraded to a Jimny then you can discuss your current Suzuki 4x4 here!
James' SJ Build
18 Mar 2022 13:07 #242377
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
James' SJ Build was created by mlines
James' new project has arrived and work is about to commence.
Here is the introduction video.
Here is the introduction video.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9054
- Thank you received: 1814
18 Mar 2022 14:36 #242378
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic James' SJ Build
Very envious. A mate had a 410 back in the day and I spent time welding it up. Very nice.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2955
- Thank you received: 663
18 Mar 2022 16:46 #242382
by jackonlyjack
Replied by jackonlyjack on topic James' SJ Build
I really need an sj in my life
Looks in great condition
Looks in great condition
Please Log in or Create an account to join the conversation.
18 Mar 2022 22:42 #242386
by Gadget
Replied by Gadget on topic James' SJ Build
Love it, good to see they haven't all rusted to pieces.
Please Log in or Create an account to join the conversation.
Time to create page: 0.156 seconds