Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
JX06
Less
More
- Posts: 9121
- Thank you received: 1827
03 Dec 2019 05:38 #216171
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
That's making my 101k miles seem like hardly run in! Goes to prove that with a little bit of care and attention a Jimny will just keep going.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- muto
- Topic Author
- Visitor
-
Public
17 Mar 2020 19:57 #220004
by muto
Replied by muto on topic JX06
MOT done succesfully of course . Couple of recommendations got. Rear prop shaft is going out. Anyone have a good prop for sale? Probably just a bolt in job?
Please Log in or Create an account to join the conversation.
- muto
- Topic Author
- Visitor
-
Public
22 Dec 2020 21:30 #231111
by muto
Replied by muto on topic JX06
Still very happy with the car. 321kkm and just got a new clutch fitted. The original had still plenty of life left, but it just felt strange and little tired. Also swapped some less used prop shafts.
Please Log in or Create an account to join the conversation.
- muto
- Topic Author
- Visitor
-
Public
08 Aug 2021 00:48 #237380
by muto
Replied by muto on topic JX06
Some "trouble" lately. Got EGR error and poor idle. Had to take out the EGR valve and it was stuck. Running fine now.
Fan clutch also failed and caused overheating when it was 30c outside and car idling. Bought a new radiator and original Aisin clutch. Fixed the issue.
330tkm and running fine otherwise .
Fan clutch also failed and caused overheating when it was 30c outside and car idling. Bought a new radiator and original Aisin clutch. Fixed the issue.
330tkm and running fine otherwise .
Please Log in or Create an account to join the conversation.
Time to create page: 0.125 seconds