renard38's jimny

Hi,
i'm renard38 from France, so sorry for my very bad english :blush: :S
My jimny, 2004, with suspension +7cm ( 3" ), body lift +7 (3"), transfert box 4.16 ( who come's from a samurai 413 ), BF mud KM2 235-75-15...

Pictures:

the shielding:

body lift (3" )

the steering column was to short so:

the air box

That's all for the moment.
A+

looking good!
your english is much better than my french :lol:

Hi

Were did You get the Shovel bracket (holder) from ?

I would like to have one.

Best regards from Sweden

Omar

My Shovel bracket (holder)is homemaid. I have seen this on the japan's site

some pictures:

A+

The continuation of the preparation:

i have put this ( whitch come's from a Nissan Partol GR )

and new light for the move back ( 200 watts ):

A+

an old video ( i had a body lift in +40 mm, and tyre 215-75-15, with original transfert box )



and a new, in the french Alpes at 2000 m, on a track road:




A+

You lucky man, those views are awesome

I love Japan's jimny. I would like have this:

with a small front bumper:

and a small rear corner bumper:

and an exhaust like this:

so i decided to make it myself ( cause it's impossible to find rear corner bumper in France, and in import, it's to expensive )

I used polyester resin:

dismantling of the rear bumper

Next pictures coming soon
A+

renard38 wrote:

The continuation of the preparation:

A+

Someone has fitted your steering wheel on the wrong side, you should complain to Suzuki!

Nice build, I like the idea about the rear corners. I was only speking to Knight (from this board) about how ugly the corners look after a KAP bumper is fitted.

I might pinch the pictures for inclusion in an article page for the main site.

Martin

hi,

I painted the rear corner bumper. It is not easy to do, this is why, it is not quite finished:

After, I put the turn light in place of reverse light:
( but, there is a special bulb socket, so i must buy a light who come's from a suzuki swift )

Then, i changed the location of silentblock to adapt my exhaust:

and i maked my license plate bracket :

the plate is illuminated with LED lighting motorcycle

in the night:

next pictures coming soon
A+

Following the preparation
my exhaust: ( raceland blast 43 )

it has no baffle

and the sound is adjustable

Then I cut the pipe:

bracket with the silent block:

fixing:

nex pictures coming soon

and a video:

two new videos:

this summer in the woods:



and in the hit of the night:



A+