A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

question for Martin ( busches )

  • renard38
  • Topic Author
  • Visitor
  • Visitor
    Public
07 Jan 2011 19:38 #9058 by renard38
question for Martin ( busches ) was created by renard38
hi,

I received the answher today: impossible to find bushes in France.
( they sell only polyuréthane, but i don't like this, cause the flex are not very good )

i need 4 bushes for the rear:

[img


you give references: ADK 88006 - Axle end bushes (Four required)

www.camskill.co.uk/products.php?plid=m30b0s2966p43001

and these 4 bushes :

[IMG


you give reference: ADK 88007 - Body end bushes

www.camskill.co.uk/products.php?plid=m30b0s2889p37291

Is it all right???

Is it a good weebsite adress for buy this???

Thanks for reply ;)

Please Log in or Create an account to join the conversation.

More
07 Jan 2011 19:59 #9060 by mlines
www.camskill.co.uk sell the ADK ones.

You may also like to try www.andrewpage.com/ as a number of people have found them to be cheaper. If they will not ship to France then let me know and I will buy them for you and onward ship.

Another source is www.rhinorays.co.uk


Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • Keefe
  • Visitor
  • Visitor
    Public
07 Jan 2011 20:08 #9061 by Keefe
Replied by Keefe on topic Re: question for Martin ( busches )
The Sheffield Andrew Page seems to be the cheapest.

ANDREW PAGE LTD P

3 OAK STREET, HEELEY,SHEFFIELD, S8 9UB

Telephone:
0114 2554405

www.blueprint-adl.co.uk/index.asp

Please Log in or Create an account to join the conversation.

  • renard38
  • Topic Author
  • Visitor
  • Visitor
    Public
07 Jan 2011 20:55 #9069 by renard38
Replied by renard38 on topic Re: question for Martin ( busches )
I don't find this on Andrew Page:

www.andrewpage.com/

This website don't know the references: ADK 88006 and ADK 88007

Have you got a good link ?? Cause with the phone, and my very bad speak, it would be difficult :sick:

Please Log in or Create an account to join the conversation.

  • Keefe
  • Visitor
  • Visitor
    Public
07 Jan 2011 22:01 - 08 Jan 2011 11:06 #9085 by Keefe
Replied by Keefe on topic Re: question for Martin ( busches )
You might be as well taking Martin up on his offer of getting them and sending them on to you.

I've just put France in the Blueprint site and the nearest places are Spain, Portugal and Italy.

PORTUGAL
Automotive Distributors Limited Sucursal em Portugal (SeP)
Quinta dos Estrangeiros
Rua A, Pavilhão 7, Apartado 125
2669-908 Venda do Pinheiro
Lisboa

Tel: +351 219 663 720
Fax: +351 219 663 729

SPAIN
Auto Especialistas, Distribución y Logística España S.L.
Calle Cronos 24-26
Bloque 1
Bajo - E 13
28037 Madrid

Tel: +34 91 743 34 24
Fax: +34 91 743 34 25

ITALY
ADL - Automotive Distributors Italia S.r.l.
Via Lavoratori Autobianchi 1
Unità 6
20033 Desio
MB
Italia

Tel: +39 0362 1820150
Fax: +39 0362 1798699

If it's a problem and if Martin can't do it, let me know and I can do the same for you, get them and post them on to you.

I'll ring Andrew Page and get a price tomorrow morning. It is all the rear bushes? 6 in total?
ADK 88006 x4 axle end £22.72 each including Vat (£18.93 each + 20% Vat)
ADK 88007 x2 Body end £10.44 each including Vat
So the total for all 6 bushes works out to £111.32 inc Vat + Postage

I don't know why the 4 axle end bushes are so more expensive?

I think I read Rhino Rays are about £15 each + Vat?

It won't hurt me to ring them tomorrow for you and get a price.

hth

Keith :)

Have rung the Sheffield branch and spoken to a guy named Mark.
The prices etc are above in red.

K
Last edit: 08 Jan 2011 11:06 by Keefe. Reason: Missed details

Please Log in or Create an account to join the conversation.

  • renard38
  • Topic Author
  • Visitor
  • Visitor
    Public
08 Jan 2011 18:09 #9121 by renard38
Replied by renard38 on topic Re: question for Martin ( busches )
thanks for your help, i'm very impressed :blush:

prices are finally almost the same. I'll try to buy this here : www.camskill.co.uk ( most simple for me )

if it does not work I'll let you informed ;)

Please Log in or Create an account to join the conversation.

Time to create page: 0.141 seconds
Joomla template by a4joomla