A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

jimny airbag sensor

More
26 May 2009 14:54 #736 by jonplace
jimny airbag sensor was created by jonplace
wheres the airbag sensor on a 2002 jimny
reason i ask is i may cut off the crumple zone tomorrow to either put in a winch tray
(as seen here)

or at least HD recovery mounts.
want to make sure i dont upset the airbags when mod'ing the front end

Please Log in or Create an account to join the conversation.

More
26 May 2009 18:10 #737 by mlines
Replied by mlines on topic Re:jimny airbag sensor
As far as I am aware the sensor is built into the Airbag computer itself. The Airbag computer is under the centre console in front of the gearstick. Looking at the circuit diagram there are no "sensors" in the system and no Airbag components outside of the cabin of the car

Martin
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
26 May 2009 19:17 #738 by jonplace
Replied by jonplace on topic Re:jimny airbag sensor
good stuff martin thanks
i'll get crackin with the jnr hacksaw in the morn :laugh:

Please Log in or Create an account to join the conversation.

Time to create page: 0.125 seconds
Joomla template by a4joomla