A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Fender seal
05 Feb 2026 13:10 #263632
by Joe999
Fender seal was created by Joe999
Hi Guys,
Joe here from Hertfordshire (UK). I just got a 2019 3dr a week ago. Busy to get some bits to make it nicer.
I noticed that the right rear fender seal (if it is what you call it), moved down behind the fender.
Can this just be glued/sticked/siliconed back or will I have to replace the complete seal?
Thank you for any advice.
Joe
Joe here from Hertfordshire (UK). I just got a 2019 3dr a week ago. Busy to get some bits to make it nicer.
I noticed that the right rear fender seal (if it is what you call it), moved down behind the fender.
Can this just be glued/sticked/siliconed back or will I have to replace the complete seal?
Thank you for any advice.
Joe
Please Log in or Create an account to join the conversation.
05 Feb 2026 13:55 #263634
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Fender seal
Yes, as standard it comes with a very poor strip of double sided tape attached so you can use similar
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: Joe999
Please Log in or Create an account to join the conversation.
Time to create page: 0.155 seconds
