A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Help with choosing replacement wheels/tyres
- petejones69
- Topic Author
- Offline
- New Member
-
Registered
Less
More
- Posts: 6
- Thank you received: 0
24 Feb 2025 10:23 #259567
by petejones69
Replied by petejones69 on topic Help with choosing replacement wheels/tyres
Found these deals on ebay, which is ideal for me, getting the wheels and tyres delivered so I can just pop them on myself:
x4 235/75R15 ROADCRUZA RA1100 TYRES ON 15" BLACK MODULAR WHEELS
x4 235/75r15 Roadcruza Ra3200 Tyres On 15" Black Modular Wheels
Was thinking of the heavier tread for muddy tracks, etc. I don't drive the jimny that often, just round the local area and it's mainly for the fun of it and to cope with bad weather.
Cheers
Pete
x4 235/75R15 ROADCRUZA RA1100 TYRES ON 15" BLACK MODULAR WHEELS
x4 235/75r15 Roadcruza Ra3200 Tyres On 15" Black Modular Wheels
Was thinking of the heavier tread for muddy tracks, etc. I don't drive the jimny that often, just round the local area and it's mainly for the fun of it and to cope with bad weather.
Cheers
Pete
Please Log in or Create an account to join the conversation.
24 Feb 2025 11:34 - 24 Feb 2025 11:35 #259568
by yakuza
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic Help with choosing replacement wheels/tyres
235's on 2" lift must have the original wheels to avoid rubbing.
My 235's on 5,5 ET0 rims have just a tad bit rub so wider and more offset must rub more.
Edit: But the plastic can be cut of course.
My 235's on 5,5 ET0 rims have just a tad bit rub so wider and more offset must rub more.
Edit: But the plastic can be cut of course.
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Last edit: 24 Feb 2025 11:35 by yakuza.
The following user(s) said Thank You: petejones69
Please Log in or Create an account to join the conversation.
Time to create page: 0.116 seconds