A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Just a quick note to say that I recently replaced the lower hinge on the rear door of my 2011 Jimny. Very easy to do, didn’t need to take the rear bumper off, just “peeled” it back a little. Propped up the open door, took off the old hinge, replaced it and tightened up the 3 door side bolts, then semi tightened the 2 frame side bolts, closed the door which then self aligned the door, slacked off the 2 frame side bolts (hinge then aligned) and then finally fully tightened them up.
Bought the hinge off Martin who sells them in the forum shop.
bryn
The following user(s) said Thank You: Lambert, gv42
