A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Switch connectors

mlines
Topic Author
Offline
Administrator
Super Users
Wokingham, UK

26 Oct 2023 17:44 - 26 Oct 2023 17:47 #251759 by mlines

Switch connectors was created by mlines

I know there is a wealth of knowledge on here, I am sure some of you read the AMP Catalogue as night time reading

I also know that vehicle manufacturers avoid custom connectors as they cost more than cheap high volume manufactured connectors

Anyone know where I can source the inverse (ie female) version of this

and yes I know its overall a female socket connection with male pins so the inverse is a male plug with female sockets

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Last edit: 26 Oct 2023 17:47 by mlines.

Please Log in or Create an account to join the conversation.

Roger Fairclough
Offline
Platinum Member
Registered

26 Oct 2023 19:17 #251769 by Roger Fairclough

Replied by Roger Fairclough on topic Switch connectors

Try.
www.auyoelectricsupplies.co.uk
or
www.vehicleproducts.co.uk

Roger

Please Log in or Create an account to join the conversation.

Busta
Offline
Platinum Member
Registered

26 Oct 2023 19:19 #251770 by Busta

Replied by Busta on topic Switch connectors

Looks like the fog light switch? I harvested one from a scrap Jimny.
You could try scrolling through here: www.te.com/usa-en/plp/automotive-connect...utPL=false&instock=N

Please Log in or Create an account to join the conversation.