A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Overheating at motorway speeds/high revs for long periods of time
- rogerzilla
- Visitor
-
Public
14 Sep 2023 05:25 #250800
by rogerzilla
Replied by rogerzilla on topic Overheating at motorway speeds/high revs for long periods of time
£2000 was specifically because it was a main dealer who had the car for investigation. It would possibly have been a lot more than that - we all know what their prices are like!
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1908
- Thank you received: 493
14 Sep 2023 12:35 #250810
by DrRobin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Replied by DrRobin on topic Overheating at motorway speeds/high revs for long periods of time
That's a great kit Mike and at £18 plus you get several uses out of it I would say it's a no-brainer, just get the kit and test, it will be quicker than removing the rad or even the plugs.
Good spot
Robin
Good spot
Robin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Please Log in or Create an account to join the conversation.
14 Sep 2023 14:46 #250814
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Overheating at motorway speeds/high revs for long periods of time
As ALFS explained on Reddit those testers detect CO2 from cylinder pressure and work by bubbling gas from the radiator through the fluid, as it dissolves it becomes acidic.
(I actually thought you tested the coolant for hydrocarbons, as testing the coolant itself for acidity is never going to work)
I'd save the money and just look for residual pressure in the radiator when the engine is cold or the level in the expansion tank going up as I suggested over there.
I also suggested looking for signs the crank pulley is new, as when the pulley de-laminates and the belt comes off, some owners drive it until it boils up, which can warp the head and cause a weeping head gasket..
(I actually thought you tested the coolant for hydrocarbons, as testing the coolant itself for acidity is never going to work)
I'd save the money and just look for residual pressure in the radiator when the engine is cold or the level in the expansion tank going up as I suggested over there.
I also suggested looking for signs the crank pulley is new, as when the pulley de-laminates and the belt comes off, some owners drive it until it boils up, which can warp the head and cause a weeping head gasket..
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.154 seconds