A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Has anybody got fitted The off road armoury crawler box and fiting kit, this is the next big mod am looking at, always best to get advice from people that have it fitted. Is it a straight bolt of bolt on job, any info would be great.
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Yes, I have built up an SJ410 Rocklobster box and fitted it using the Off-Road armory kit to my Jimny. All the write ups about this are the ones on this site. You will need an SJ Front propshaft and need the capability of bending the SJ Transfer Lever (lots of heat!)
How about sending in pictures of your truck. If you email any pictures to photos@tv4x4.co.uk then I will put them up
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
All pictures are welcome and it is fine to advertise events on my site. I am the webmaster for tv4x4 club (
www.tv4x4.co.uk
) so if the event is down south and clashes with one of ours then perhaps I would have took take a different view on the event. Otherwise feel free to advertise.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
