BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Winch control box fitting

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
27 Mar 2023 09:15 #248261 by Lambert
Replied by Lambert on topic Winch control box fitting
And with a bit of design thought a bracket could be made to allow access to the fuses. That's not the point. The point is there are a number of options with a little bit of thought.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
27 Mar 2023 20:45 #248266 by giacomom
Replied by giacomom on topic Winch control box fitting
  In the end here is the solution I found, fixed with 3 brackets to the wing I think it's an excellent position
Giacomo
The following user(s) said Thank You: Soeley

Please Log in or Create an account to join the conversation.

More
27 Mar 2023 21:16 #248267 by Roger Fairclough
Replied by Roger Fairclough on topic Winch control box fitting
I don't think you would get that box on top of the fuse box.
[img


Roger

Please Log in or Create an account to join the conversation.

More
28 Mar 2023 06:24 #248273 by giacomom
Replied by giacomom on topic Winch control box fitting
In fact I put it on the other side of the engine compartment....
Giacomo

Please Log in or Create an account to join the conversation.

Time to create page: 0.195 seconds
Joomla template by a4joomla