A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Underside protection
06 Jul 2022 15:07 - 06 Jul 2022 15:07 #243962
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Underside protection
I just fitted the transfer box guard. I didn't like how low the transfer box sits, and being an auto, there is going to be very little chance of finding one second hand.
Tip 1: you can easily fit the guard without jacks or effort with a couple of zip ties to hold up the bolt end, then just lift the stud end with one hand and pop the nuts on with the other.
Tip 2: the transfer guard reflects a lot of noise back up into the car, I put a pad of closed cell foam underbonnet insulation on mine to absorb some of the noise.
Tip 1: you can easily fit the guard without jacks or effort with a couple of zip ties to hold up the bolt end, then just lift the stud end with one hand and pop the nuts on with the other.
Tip 2: the transfer guard reflects a lot of noise back up into the car, I put a pad of closed cell foam underbonnet insulation on mine to absorb some of the noise.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Last edit: 06 Jul 2022 15:07 by facade.
Please Log in or Create an account to join the conversation.
Time to create page: 0.115 seconds