A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
I'm not aware of such a thing being available other than a tubular manifold being available from somewhere in Australia? Most people seem to have a system custom made once they have the 1.6 if they bother at all.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
as my original system slowly rust away I replace it with 2" exhaust parts.
I have not seen any such system either but i haven't looked for it. I would most likely not be happy with it as would want it to be well tucked up there to avoid it rubbing when offroading.
I suspect my replacement of the double insulated pipe from cat1 to cat2 would have helped. inner diameter there was not much inside the insulation and now it is 2".
There are a few high end systems about, have a look at HM4x4.com.
I had a stainless 2" single box system with a 200cpa sports cat built at Tony Banks in Leeds, sounded ok and gave some improvement on the 1300 and works fine on the 1600. £600 but it was a few years back.
