A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
jimny just cranks but won't start crackshaft sensor wires
- AldrinSarmiento
- Topic Author
- Offline
- New Member
-
Registered
Less
More
- Posts: 5
- Thank you received: 0
16 Mar 2022 10:07 #242341
by AldrinSarmiento
Hello I currently own a Suzuki Jimny 2002 model with m13a engine. My Jimny just crank but it won’t start. I had checked fuel and air supply and I think they are good. Now I found out that my crankshaft sensor wires are snapped out of the connector can you guys help me I cannot connect them back I have no idea what are the arrangement of the wires in the connector I would much appreciate if you send me a picture of your connector. thank you so much!!
Please Log in or Create an account to join the conversation.
- stimpy
- Visitor
-
Public
16 Mar 2022 18:23 #242348
by stimpy
Replied by stimpy on topic jimny just cranks but won't start crackshaft sensor wires
I'm afraid I dont know the answer nor have an M13A but if you google Jimny manuals you'll be able to pull up wiring diagrams which will tell you.
There's a post in the wiki iirc about it...
There's a post in the wiki iirc about it...
Please Log in or Create an account to join the conversation.
- AldrinSarmiento
- Topic Author
- Offline
- New Member
-
Registered
Less
More
- Posts: 5
- Thank you received: 0
17 Mar 2022 11:08 #242362
by AldrinSarmiento
Replied by AldrinSarmiento on topic jimny just cranks but won't start crackshaft sensor wires
Thank you for helping out I also cleaned the crankshaft sensor and now it worked!! here's what I found
www.manualslib.com/manual/816683/Suzuki-...html?page=438#manual
Please Log in or Create an account to join the conversation.
Time to create page: 0.127 seconds