A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Keep brake backing plates on or remove them ?
- Dirtbird
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
17 Sep 2021 20:47 #238734
by Dirtbird
Replied by Dirtbird on topic Keep brake backing plates on or remove them ?
Thinking of doing it tomorrow be done with them. Thanks for the reply.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9240
- Thank you received: 1854
18 Sep 2021 05:01 #238741
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Keep brake backing plates on or remove them ?
In the past I have removed them from various vehicles and haven't noticed any detriment. But like Jack says they will have to be fairly stuffed before they come off Temeraire.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: Dirtbird
Please Log in or Create an account to join the conversation.
- Dirtbird
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
18 Sep 2021 19:40 #238763
by Dirtbird
Replied by Dirtbird on topic Keep brake backing plates on or remove them ?
Left them on. Concentrated on getting new pads on and could get them to fit had to clean the bush /sliders, they got them to fit, just need to stick in the clutch which came with no thrust bearing
Please Log in or Create an account to join the conversation.
Time to create page: 2.770 seconds