A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
1996 JA22W (Japanese) Suspension
- JA22WCanada
- Topic Author
- Offline
- New Member
-
Registered
Less
More
- Posts: 3
- Thank you received: 0
05 Nov 2019 03:37 #215373
by JA22WCanada
1996 JA22W (Japanese) Suspension was created by JA22WCanada
New to the forum. I've imported a Japanese 1996 Jimny - JA22W with K6A engine to Canada. I need to replace the shock absorbers as their completely worn out but everything listed on line is for 1998 and newer. Anybody on this forum familiar with the Japanese Domestic Jimny's. I think it has a 1 or 2" lift in it.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9047
- Thank you received: 1811
05 Nov 2019 04:58 #215374
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic 1996 JA22W (Japanese) Suspension
Not a very common model over here and the bigger issue is that if it has been lifted then the standard dampers won't work with the additional height unless it has been done with spacers. Have you cleaned and examined a damper to see if it has any stamped markings to give a clue of a part numbers etc.?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
05 Nov 2019 05:59 #215379
by yakuza
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic 1996 JA22W (Japanese) Suspension
And of course a picture of the car and especially suspension setup would help as well as we have been looking at pictures of this since the beginning of the internet..
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Please Log in or Create an account to join the conversation.
Time to create page: 0.120 seconds