A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
4wd issues after MOT work
- rappey
- Visitor
-
Public
28 Feb 2018 18:38 #189761
by rappey
Replied by rappey on topic 4wd issues after MOT work
Did you resolve your problem?
Please Log in or Create an account to join the conversation.
28 Feb 2018 18:49 #189762
by Pixie
Replied by Pixie on topic 4wd issues after MOT work
Hi. No. There's an oily substance around the inside of the drivers side wheel so it looks like a leak of some sort. I rang the garage and they're going to take a look tomorrow if I can get it there.
Please Log in or Create an account to join the conversation.
- mickt
- Visitor
-
Public
28 Feb 2018 19:08 #189766
by mickt
Replied by mickt on topic 4wd issues after MOT work
£800 for that is super steep as it is a reasonably easy DIY job!
Please Log in or Create an account to join the conversation.
28 Feb 2018 20:18 #189768
by Pixie
Replied by Pixie on topic 4wd issues after MOT work
What...replacing the front king pins, bearings and seals? The price also included the MOT...
Please Log in or Create an account to join the conversation.
28 Feb 2018 20:20 #189769
by Pixie
Replied by Pixie on topic 4wd issues after MOT work
Fyi parts alone came to £350 ish...although I know I could've got them a bit cheaper online, it was an mot fail and I needed my car.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9126
- Thank you received: 1828
28 Feb 2018 20:24 #189770
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic 4wd issues after MOT work
Find another garage. 800 quid for the kingpins and a test is obscene.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: Pixie
Please Log in or Create an account to join the conversation.
Time to create page: 0.244 seconds