A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Hello all,
First post and I'm asking for advice..Been looking for manual hubs for my Jimny,seem very difficult to get hold of.
I was at a breakers yard yesterday and there was a vitara with manual hubs
my question is will these vitara hubs fit my jimny.
But, in fact, mine were off a Vitara. Depending on what type of hubs you get make sure you get the cone washers with it. some have chamfered holes so need the washers and they are NOT easy to come by if you don't get them.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
