A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
heater matrix ??
- slingo
- Topic Author
- Visitor
-
Public
15 Oct 2010 15:52 #5159
by slingo
heater matrix ?? was created by slingo
hi guys
ive recently purchased a jimny jeep im going to build it up for off roading and road use, ive just done crank oil seals and cambelt and a box of goodies has just turned up in the post
i have a smell of antifreeze coming through the heater and it dos nt get that hot even though the feed pipes are hooootttt .
has anybody got a guide to replacing it ???
ive recently purchased a jimny jeep im going to build it up for off roading and road use, ive just done crank oil seals and cambelt and a box of goodies has just turned up in the post
i have a smell of antifreeze coming through the heater and it dos nt get that hot even though the feed pipes are hooootttt .
has anybody got a guide to replacing it ???
Please Log in or Create an account to join the conversation.
- slingo
- Topic Author
- Visitor
-
Public
- darthloachie
- Visitor
-
Public
18 Oct 2010 13:10 - 18 Oct 2010 13:10 #5243
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re: heater matrix ??
Don't buy it, it is commonly and freely available on the Internet - Google is your friend.
If you are not good at Google tell me the model/year/engine you have and I will tell you an accurate Google reference to use.
Beware of paying for some of the Jimny Hints and Tips CD, they contain the content you have all provided to everyone for free on this site!!
Martin
If you are not good at Google tell me the model/year/engine you have and I will tell you an accurate Google reference to use.
Beware of paying for some of the Jimny Hints and Tips CD, they contain the content you have all provided to everyone for free on this site!!
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 18 Oct 2010 13:10 by mlines.
Please Log in or Create an account to join the conversation.
- slingo
- Topic Author
- Visitor
-
Public
18 Oct 2010 16:39 #5247
by slingo
Replied by slingo on topic Re: heater matrix ??
Cheers guys I will have a look ! I put my 3inch lift on at the weekend I will pit some pictures later ......jeep tends to wander though 
Please Log in or Create an account to join the conversation.
- slingo
- Topic Author
- Visitor
-
Public
24 Oct 2010 15:09 #5322
by slingo
Replied by slingo on topic Re: heater matrix ??
wahhooo got heat took 6 hours though.....fooking stupid place to put it
i used demister man off ebay and it fitted perfect
took 6 hours though.....fooking stupid place to put iti used demister man off ebay and it fitted perfect
Please Log in or Create an account to join the conversation.
Time to create page: 0.130 seconds