A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Radius Arm Bushes

  • Swifty
  • Topic Author
  • Visitor
  • Visitor
    Public
25 Jul 2013 13:41 #78155 by Swifty
Radius Arm Bushes was created by Swifty
Calling all Bush experts, lol

Had some bushes arrive with 46282-81A00 on the bag, on inspection they have a diff number written on them 09319-12043

Is this normal? I've read Martin's guide and googled both numbers and I'm confused as to what I actually have!!!! Each site has a different decription of them, :-(

Please Log in or Create an account to join the conversation.

  • markyp2000
  • Visitor
  • Visitor
    Public
25 Jul 2013 15:18 #78164 by markyp2000
Replied by markyp2000 on topic Radius Arm Bushes
Where did thay come from call then if it was a compony

Please Log in or Create an account to join the conversation.

  • Swifty
  • Topic Author
  • Visitor
  • Visitor
    Public
25 Jul 2013 15:29 #78167 by Swifty
Replied by Swifty on topic Radius Arm Bushes
Contacted them and they say they will get back to me. They were from a shop on ebay.

Please Log in or Create an account to join the conversation.

  • Swifty
  • Topic Author
  • Visitor
  • Visitor
    Public
25 Jul 2013 15:31 #78168 by Swifty
Replied by Swifty on topic Radius Arm Bushes
Attached a pic of one, they appear to look and measure the same as the bushes currently on my jimny.

Attachments:

Please Log in or Create an account to join the conversation.

More
27 Aug 2013 12:26 #81172 by cos124
Replied by cos124 on topic Radius Arm Bushes
just as a matter of interest, are the bushes (axle end) the same as at the chassis mount end?
many thanks

Please Log in or Create an account to join the conversation.

More
27 Aug 2013 12:45 #81179 by mlines
Replied by mlines on topic Radius Arm Bushes
NO they are different
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
27 Aug 2013 19:32 #81208 by kirkynut
Replied by kirkynut on topic Radius Arm Bushes
The compound of the rubber differs I think - they will physically go in the same place as the dimensions are the same.

Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

More
30 Aug 2013 10:12 #81569 by cos124
Replied by cos124 on topic Radius Arm Bushes
many thanks all

Please Log in or Create an account to join the conversation.

  • zuki andy
  • Visitor
  • Visitor
    Public
30 Aug 2013 10:57 #81574 by zuki andy
Replied by zuki andy on topic Radius Arm Bushes
The axle end bushes are not as wide as the chassis end bushes.

Please Log in or Create an account to join the conversation.

Time to create page: 0.170 seconds
Joomla template by a4joomla