BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Engines

  • MWells
  • New Member
  • New Member
    Public
More
17 Mar 2013 08:55 #66022 by MWells
Replied by MWells on topic Engines
I believe it is a k9k renault engine.

Please Log in or Create an account to join the conversation.

  • Dave cc
  • New Member
  • New Member
    Public
More
17 Mar 2013 18:10 #66109 by Dave cc
Replied by Dave cc on topic Engines
Strangly had to go and look at 1 of the dci renault engines today guessing 2 litre as fitted in the X Trail with a load of problems well what can i say other than rattly smokey horrible thing nice to see Renault have got there act together NOT

Please Log in or Create an account to join the conversation.

More
17 Mar 2013 20:27 #66120 by Basketcase
Replied by Basketcase on topic Engines
Aaah cheers guys looks like it'll be a gas conversion coming up then. Guy I work with has a frontera on LPG gets 300 miles on £37 sounds better to me than 190 miles on £52 petrol unless there's any other ways of saving money whilst keeping Jim looking the same and running as he does?

Please Log in or Create an account to join the conversation.

  • Smoggy
  • New Member
  • New Member
    Public
More
17 Mar 2013 20:46 #66122 by Smoggy
Replied by Smoggy on topic Engines
Fit an Isuzu 1.7td like Dave CC then you can run it on pure veg oil in summer and 50/50 veg diesel mix in winter.

Please Log in or Create an account to join the conversation.

More
17 Mar 2013 22:23 #66139 by Rhinoman
Replied by Rhinoman on topic Re: Engines

Dave cc wrote: Forget it unless you can get the loom and the hole 9 yard will be common rail friggin wiring nitemare :(


Its a DCM1.2 ECU - designed in Cirencester, built in Brum :)
Some Suzukis and a bunch of motorcycles.

Please Log in or Create an account to join the conversation.

  • Dave cc
  • New Member
  • New Member
    Public
More
17 Mar 2013 22:45 #66141 by Dave cc
Replied by Dave cc on topic Re: Engines

Rhinoman wrote:

Dave cc wrote: Forget it unless you can get the loom and the hole 9 yard will be common rail friggin wiring nitemare :(


Its a DCM1.2 ECU - designed in Cirencester, built in Brum :)


But realistically for the bloke at home how possible to get it working as a stand alone unit on a ageing Jimny ?????????????

Please Log in or Create an account to join the conversation.

Time to create page: 0.155 seconds
Joomla template by a4joomla