A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Engines
- Basketcase
-
Topic Author
- Offline
- Platinum Member
-
Registered
18 Mar 2013 01:08 #66148
by Basketcase
Replied by Basketcase on topic Re: Engines
I'd love to get an Isuzu 1.7 in there but I don't have the know how to do all the faffing about and time or a place to do all the making up of brackets and everything else 
and it would also take a while to do so I'd be lost without the Jim on a weekend
and it would also take a while to do so I'd be lost without the Jim on a weekend Please Log in or Create an account to join the conversation.
18 Mar 2013 22:30 #66259
by Rhinoman
Depends on your ability, shouldn't be much more difficult than a G16B into a Sammy. Its a very common system so spare engine/electrical parts wouldn't be a problem, its really down to how easy/expensive it would be to source the parts to make it a bolt in.
Some Suzukis and a bunch of motorcycles.
Replied by Rhinoman on topic Re: Engines
Dave cc wrote:
But realistically for the bloke at home how possible to get it working as a stand alone unit on a ageing Jimny ?????????????Rhinoman wrote:
Its a DCM1.2 ECU - designed in Cirencester, built in BrumDave cc wrote: Forget it unless you can get the loom and the hole 9 yard will be common rail friggin wiring nitemare
Depends on your ability, shouldn't be much more difficult than a G16B into a Sammy. Its a very common system so spare engine/electrical parts wouldn't be a problem, its really down to how easy/expensive it would be to source the parts to make it a bolt in.
Some Suzukis and a bunch of motorcycles.
Please Log in or Create an account to join the conversation.
Time to create page: 0.131 seconds