A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Fabbing again rear bumper this time

Dave cc
Topic Author
New Member
Public

05 Mar 2013 22:49 - 05 Mar 2013 22:51 #64701 by Dave cc

Fabbing again rear bumper this time was created by Dave cc

Thought was about time i busted out the new R tec 40 plasma and get to work on a rear bumper had a couple hours to play this evening
Going to make it as 2 1/4 bumpers hopefully will allow me to carry a 33 on the rear door or swing away wheel carrier if i have the inclanation
Bit of a weird angle on the photo makes arches look 2 wide but ive always been crap with Photography :laugh:

Attachments:

Last edit: 05 Mar 2013 22:51 by Dave cc.

Please Log in or Create an account to join the conversation.

Dave cc
Topic Author
New Member
Public

06 Mar 2013 07:33 - 06 Mar 2013 07:40 #64714 by Dave cc

Replied by Dave cc on topic Fabbing again rear bumper this time

MysticRich wrote: Hi Dave mate
I would advise to make the swing away I made a rear wheel carrier to carry my 32" on rear door and the weight of the wheel has actually ripped the door to bits

Yeah i did think that will have a look see what i can come up with :unsure:

plannining to bring the rear winch out below the door as well so wheel will need to swing away when that is in use

Last edit: 06 Mar 2013 07:40 by Dave cc. Reason: Spelling

Please Log in or Create an account to join the conversation.

Dave cc
Topic Author
New Member
Public

07 Mar 2013 22:19 #64939 by Dave cc

Replied by Dave cc on topic Fabbing again rear bumper this time

got a bit done tonite think i can live with the look :cheer:

And no bloody Walnut wooden dash sort of commets :laugh:

Attachments:

Please Log in or Create an account to join the conversation.

reaper
New Member
Public

07 Mar 2013 22:26 #64944 by reaper

Replied by reaper on topic Fabbing again rear bumper this time

Looking good mate , are those trailer arches ?
Noticed you have marked out for the lights imo dont bother it takes alot of strength out , when i get time ima weld mine up and rewire the body lights :-)

Please Log in or Create an account to join the conversation.

Dave cc
Topic Author
New Member
Public

07 Mar 2013 22:35 - 07 Mar 2013 22:37 #64946 by Dave cc

Replied by Dave cc on topic Fabbing again rear bumper this time

reaper wrote: Looking good mate , are those trailer arches ?
Noticed you have marked out for the lights imo dont bother it takes alot of strength out , when i get time ima weld mine up and rewire the body lights

Jeep Wrangler CJ sumfin :laugh: came out at exactly 6.5 inches wide covers tyre spot on should keep plod happy

Last edit: 07 Mar 2013 22:37 by Dave cc.

Please Log in or Create an account to join the conversation.

Dan_w
New Member
Public

07 Mar 2013 23:11 - 07 Mar 2013 23:12 #64957 by Dan_w

Replied by Dan_w on topic Fabbing again rear bumper this time

That is looking spot on Dave

Last edit: 07 Mar 2013 23:12 by Dan_w.

Please Log in or Create an account to join the conversation.

Time to create page: 0.151 seconds

Fabbing again rear bumper this time

Events Menu