A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
inner drivers wing
- 03troakey
- Topic Author
- New Member
-
Public
- markyp2000
- New Member
-
Public
- 03troakey
- Topic Author
- New Member
-
Public
28 Feb 2013 19:22 #64217
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic inner drivers wing
Yes if you are have fitted manual hubs. It keeps enough vacuum to snap the hubs from one side to the other, I wouldn't like to guarantee operation of the vacuum hubs without it though.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- 03troakey
- Topic Author
- New Member
-
Public
02 Mar 2013 12:30 #64350
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic inner drivers wing
Then you can remove all the air solenoids and pipework from under the battery, join the vacuum switch wires together so the 4wd light works, remove the airtank and cap the vacuum port at the inlet manifold.
Put everything in the same box as the vacuum hubs in case you sell the car to someone who expects it to have the original parts.
Put everything in the same box as the vacuum hubs in case you sell the car to someone who expects it to have the original parts.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.129 seconds