BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Lockright removed then what to do with it ?

  • Barnyzuki
  • Topic Author
  • Visitor
  • Visitor
    Public
02 Feb 2013 11:58 #60643 by Barnyzuki
Lockright removed then what to do with it ? was created by Barnyzuki
I`m going to be removing my rear diff with the Lockright fitted and dropping a standard diff back in.

My thoughts then are these, should I put the Lockright diff in my spare axle case and drop the halfshafts in with new wheelbearings, or just get shut of the lot as is ?

It`s a lot easier to ship a diff on its own, but a built up axle ready to fit might be more appealing.

Stumped on this one !

Please Log in or Create an account to join the conversation.

More
02 Feb 2013 12:13 #60645 by facade
Replied by facade on topic Lockright removed then what to do with it ?
It is much easier to swap the diff on the axle when it is on the car than swap the whole axle out, I'd offer just the diff.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there :)

Please Log in or Create an account to join the conversation.

  • adamjimny
  • Visitor
  • Visitor
    Public
02 Feb 2013 14:21 #60661 by adamjimny
Replied by adamjimny on topic Lockright removed then what to do with it ?
let me know if your selling it with a price etc

Please Log in or Create an account to join the conversation.

  • jayjay1990
  • Visitor
  • Visitor
    Public
03 Feb 2013 07:41 #60735 by jayjay1990
Replied by jayjay1990 on topic Lockright removed then what to do with it ?
same here im interested ;)

Please Log in or Create an account to join the conversation.

  • jimnydms
  • Visitor
  • Visitor
    Public
03 Feb 2013 15:39 #60760 by jimnydms
Replied by jimnydms on topic Lockright removed then what to do with it ?
Excuse my lack of knowledge, I have seen a pic of the lock right locker but how does it attach to the diff, welded, bolt on ?

Please Log in or Create an account to join the conversation.

  • darthloachie
  • Visitor
  • Visitor
    Public
03 Feb 2013 18:20 #60769 by darthloachie
Replied by darthloachie on topic Lockright removed then what to do with it ?
you strip the diff apart and replace parts with the locker parts

there is the installation manual
www.richmondgear.com/0002pdfs/1000706MID.pdf

Please Log in or Create an account to join the conversation.

Time to create page: 0.164 seconds
Joomla template by a4joomla