A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Whining clutch
- wanderinstar
- Topic Author
- Visitor
-
Public
06 Dec 2012 14:34 #55008
by wanderinstar
Whining clutch was created by wanderinstar
When I depress the clutch pedal I get a whining sound. This does not occur until the engine is up to normal working temp.
Anyone got any ideas?
Anyone got any ideas?
Please Log in or Create an account to join the conversation.
- Blissett
- Visitor
-
Public
06 Dec 2012 14:47 #55009
by Blissett
Replied by Blissett on topic Whining clutch
Thrust bearing!!!!!
Please Log in or Create an account to join the conversation.
06 Dec 2012 15:07 #55010
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Whining clutch
Yep clutch release bearing as above
Gold Jimny the best colour (sold)

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
- darthloachie
- Visitor
-
Public
06 Dec 2012 16:00 #55011
by darthloachie
Replied by darthloachie on topic Whining clutch
wifes head under the clutch pedal? :side:
Please Log in or Create an account to join the conversation.
- bluejimny
- Visitor
-
Public
06 Dec 2012 18:32 #55030
by bluejimny
Replied by bluejimny on topic Whining clutch
mines been sqarking for 4 years now, but still going strong
Please Log in or Create an account to join the conversation.
- wanderinstar
- Topic Author
- Visitor
-
Public
08 Jan 2013 21:16 #57565
by wanderinstar
Replied by wanderinstar on topic Whining clutch
My mechanic seems to think that it could be the layshaft on its way out. Because he says if it was the release bearing it would have brocken up by now. Thing is I have only done about 2000 miles since Dec2011. Any thoughts?
Please Log in or Create an account to join the conversation.
Time to create page: 0.190 seconds