A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Re hubs
- Rob2933
- Topic Author
- Visitor
-
Public
02 Dec 2012 11:57 - 02 Dec 2012 11:58 #54634
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Yes.
You need to at least cap the small pipes on the hub to stop dirt and water entry, easiest is to leave all the pipes connected, and remove the pipe from the manifold.
The 4wd light will flash, unless you join the 2 wires at the grey vacuum switch under the battery tray.
You need to at least cap the small pipes on the hub to stop dirt and water entry, easiest is to leave all the pipes connected, and remove the pipe from the manifold.
The 4wd light will flash, unless you join the 2 wires at the grey vacuum switch under the battery tray.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Last edit: 02 Dec 2012 11:58 by facade.
Please Log in or Create an account to join the conversation.
- Skinhead
- Visitor
-
Public
- Rob2933
- Topic Author
- Visitor
-
Public
Time to create page: 0.126 seconds