A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
diff guards
- suzuki jimny fella
- Topic Author
- Visitor
-
Public
05 Oct 2012 18:12 #49566
by suzuki jimny fella
diff guards was created by suzuki jimny fella
as above i am thinking of repainting my axles so i will get it all preped for painting
can i put some weld on diff guards with just draining oil or dose the diff have to come out etc
thanks
can i put some weld on diff guards with just draining oil or dose the diff have to come out etc
thanks
Please Log in or Create an account to join the conversation.
- Paul4x4
- Visitor
-
Public
05 Oct 2012 18:15 #49569
by Paul4x4
Replied by Paul4x4 on topic diff guards
Just drain the oil.

Please Log in or Create an account to join the conversation.
- suzuki jimny fella
- Topic Author
- Visitor
-
Public
05 Oct 2012 18:18 #49570
by suzuki jimny fella
Replied by suzuki jimny fella on topic diff guards
so its ok to just drop oil is it
what about axles truss and gusset i no that gusset the hub will have to come off
what about axles truss and gusset i no that gusset the hub will have to come off
Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
05 Oct 2012 18:19 #49571
by markyp2000
Replied by markyp2000 on topic diff guards
leave it in it will act as a cooling oil then drain it and fill with new oil
Please Log in or Create an account to join the conversation.
- suzuki jimny fella
- Topic Author
- Visitor
-
Public
05 Oct 2012 18:20 #49572
by suzuki jimny fella
Replied by suzuki jimny fella on topic diff guards
have any one got pics of ora diff guards on

Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
05 Oct 2012 18:21 #49573
by markyp2000
Replied by markyp2000 on topic diff guards
if your doing all that strip it right down but make shore the trusses dont worp the axel with the heat of welding
Please Log in or Create an account to join the conversation.
Time to create page: 0.124 seconds