BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

jinmy hubs

  • mudman
  • Topic Author
  • Visitor
  • Visitor
    Public
02 Oct 2012 08:31 #49319 by mudman
jinmy hubs was created by mudman
im looking at a jimny this afternoon and was wondering where is the best place to be to hear the hubs click when testing them?

thanks chris

Please Log in or Create an account to join the conversation.

More
02 Oct 2012 08:41 #49321 by maverick
Replied by maverick on topic jinmy hubs
full lock in reverse, low box
Jalapeño, IISY?

Please Log in or Create an account to join the conversation.

  • goatboy
  • Visitor
  • Visitor
    Public
02 Oct 2012 09:09 #49323 by goatboy
Replied by goatboy on topic jinmy hubs
do you mean click as they engage 4WD? In which case as close to the front wheels as you can get, normally loudest first time you do it. If it doesn't do it whilst stationery try it slowly moving in a straight line...

Please Log in or Create an account to join the conversation.

More
02 Oct 2012 09:24 #49325 by maverick
Replied by maverick on topic jinmy hubs
Does it have Manual Hubs or Vacuum controlled?

If manual, engage them, put it into 4-wheel drive, low box, reverse gear and turn on full lock - get someone else on grass, and you listen to hubs

If vacuum controlled, then same, but i think you wont know if they are working, unless you jack one wheel use in the air....
Jalapeño, IISY?

Please Log in or Create an account to join the conversation.

  • mudman
  • Topic Author
  • Visitor
  • Visitor
    Public
02 Oct 2012 10:46 #49327 by mudman
Replied by mudman on topic jinmy hubs
chears lads there vacuum by the way just thourt id ask as i dont want to buy a lemon that iv got to spend loads on :laugh:

Please Log in or Create an account to join the conversation.

Time to create page: 0.146 seconds
Joomla template by a4joomla