A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
I think my Jimnys dying
26 Sep 2012 14:16 #48862
by Obarno
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15
Replied by Obarno on topic I think my Jimnys dying
Good one Rob and so helpful!!
Goatboy - the Lambda sensor is not very old, but of course could still fail but, the engine light's not on, so anyway something else to check. Thanks
Goatboy - the Lambda sensor is not very old, but of course could still fail but, the engine light's not on, so anyway something else to check. Thanks
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15
Please Log in or Create an account to join the conversation.
- g187eev
- New Member
-

Public
Less
More
- Thank you received: 0
26 Sep 2012 18:19 #48883
by g187eev
Replied by g187eev on topic I think my Jimnys dying
I have had a cat fall to bits and block the pipe before on a 1.3 Suzuki Carry.
RB
RB
Please Log in or Create an account to join the conversation.
- thatbigbloke
- New Member
-

Public
Less
More
- Thank you received: 0
26 Sep 2012 18:33 #48887
by thatbigbloke
Replied by thatbigbloke on topic I think my Jimnys dying
maybe the gearbox has had it, if it revs freely in N and free wheels ok and doesnt get hot its got to be the box
Please Log in or Create an account to join the conversation.
- mcjimny
- New Member
-

Public
Less
More
- Thank you received: 0
26 Sep 2012 20:26 #48927
by mcjimny
Replied by mcjimny on topic I think my Jimnys dying
Sounds very much like a blocked cat, they disintegrate and can weld the internals to the casing.
Please Log in or Create an account to join the conversation.
27 Sep 2012 09:24 #48960
by Obarno
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15
Replied by Obarno on topic I think my Jimnys dying
Thanks for your ideas. I imagine the only way to know if its the cat is to change it. I don't think it's the box as it seems to be behaving normally. The car had been standing for a couple of months and it was after that that the problem occurred.
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15
Please Log in or Create an account to join the conversation.
- markyp2000
- New Member
-

Public
Less
More
- Thank you received: 0
27 Sep 2012 17:00 #48982
by markyp2000
Replied by markyp2000 on topic I think my Jimnys dying
get some one to hold the revs at 2000rpm and feel what is coming out the exhaust
you could take the cat off and see how it runs might be abit loud or when its off see if you can see down the pipe to the cat
you could take the cat off and see how it runs might be abit loud or when its off see if you can see down the pipe to the cat
Please Log in or Create an account to join the conversation.
Time to create page: 0.192 seconds
