A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
brakes
- suzuki jimny fella
- Topic Author
- Visitor
-
Public
09 Aug 2012 21:28 #45828
by suzuki jimny fella
brakes was created by suzuki jimny fella
my wheel was hard to turn to day drivers side and on strip down there was water in the dust seal so striped it down piston out etc and there was little bits of pitting in piston clean it up rebuild it and it was the pin in caliper that holds caliper on that had seized up lol re bleed the brake and seemed to be ok
how has the piston got little holes in
how much brake fluid do the hole brake system take going to flush it tomorrow morning
dot 4is it
how has the piston got little holes in
how much brake fluid do the hole brake system take going to flush it tomorrow morning
dot 4is it
Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
- suzuki jimny fella
- Topic Author
- Visitor
-
Public
- markyp2000
- Visitor
-
Public
- suzuki jimny fella
- Topic Author
- Visitor
-
Public
- markyp2000
- Visitor
-
Public
Time to create page: 0.118 seconds