A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
my heater has been stuck on feet and windscreen since i got it - fine for demisting etc but in preparation for winter etc i had a look at it. Now theres a looped cable were it fits onto the control at the bottom. If i put it back on that it will move it back to windscreen it will....try to pull it back up it doesn't How can i get into the dash end of the controls because i can make it change by hand but its not ideal. Its like it keeps popping off when you pull it back across....if that makes sense?
The heater directions controls often fail on a Jimny and it always seems to be at the heater end, not the control end. They get kicked and broken. Its not happened to mine but people I know suggest its a simple fix.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
I have never done this. I can send a picture of what mine looks like if it helps
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
