A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Car Lifts
- auchenblae
- Topic Author
- Offline
- Elite Member
-
Registered
01 Aug 2011 15:53 #19802
by auchenblae
Az1987
Confused here as there is no slot on the chassis rail of a Jimny where you can get a strap through as the rail is continuiosly welded to the car. Do you mean round the end of the suspension arms between the chassis rail brackets that hold the suspension arms on to the car and then round the jack arms, or did you put the straps round the other parts of the suspension arms and then round the jack arms.
eddie
16 SZ3
07 JLX+ gone 16
99 JLX gone 07
Replied by auchenblae on topic Re: Car Lifts
Az1987 wrote: If we had to do any heavy work like engine out or axles off we used to use ratchet straps around the chassis rails and leg of the ramp just incase one liked the fort of back flipping off
and if you can get one try and get a ramp that has the same length legs as they are better for 4x4's.
Az1987
Confused here as there is no slot on the chassis rail of a Jimny where you can get a strap through as the rail is continuiosly welded to the car. Do you mean round the end of the suspension arms between the chassis rail brackets that hold the suspension arms on to the car and then round the jack arms, or did you put the straps round the other parts of the suspension arms and then round the jack arms.
eddie
16 SZ3
07 JLX+ gone 16
99 JLX gone 07
Please Log in or Create an account to join the conversation.
- Johnniehec
-
- Offline
- Platinum Member
-
Registered
- auchenblae
- Topic Author
- Offline
- Elite Member
-
Registered
Time to create page: 0.143 seconds