BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

T-Case Skid ideas

More
10 Jul 2012 15:36 #43874 by saxj
T-Case Skid ideas was created by saxj
I need some ideas on designing a t-case skid

The one I have, and all of the ones I have seen so far are plates that fit between the chassis rails and lower the ground clearance by about an inch.

So stuff that I was able to tackle quite effectively with my old stock height Jimny, with no skid plate, I'm having a hard time crossing now (with 2"'s of lift), because the skid acts like a plow.

I just want something that protects the vulnerable plugs on the electronic T-Case.

Any ideas?

Please Log in or Create an account to join the conversation.

  • darthloachie
  • Visitor
  • Visitor
    Public
10 Jul 2012 16:04 #43877 by darthloachie
Replied by darthloachie on topic Re: T-Case Skid ideas
pm ROCKWATT - he'll make you a custom 'bucket' mount which also acts as heavy duty brackets for holding the t box on to the chassis

Please Log in or Create an account to join the conversation.

  • edinburghmotorco
  • Visitor
  • Visitor
    Public
10 Jul 2012 16:18 #43880 by edinburghmotorco
Replied by edinburghmotorco on topic Re: T-Case Skid ideas
second that, he made me one of his new ones and its very impressive!

Please Log in or Create an account to join the conversation.

More
10 Jul 2012 16:29 #43882 by saxj
Replied by saxj on topic Re: T-Case Skid ideas
That's all very well, but it will cost a fortune to get it shipped to South Africa.

Do you have any pictures, so I can try and get something similar made up locally.

Please Log in or Create an account to join the conversation.

More
11 Jul 2012 13:23 #43954 by Johnniehec
Replied by Johnniehec on topic Re: T-Case Skid ideas
Have a look at www.zanfi.it



John.
On the 8th Day God made the LandRover -
On the 9th day he swapped it for a Jimny.
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.130 seconds
Joomla template by a4joomla