A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
The PCD is the same. All of this range of Suzukis (SJ, Jimny, Vitara) are the same, you can happily interchange the wheels.
However, the centre hole diameter of the disk changes, 107mm to 108mm
Up to VIN Number 00203804 they are 107mm
From VIN Number 00203805 onwards they are 108mm
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
I am not an engineer either, just an IT consultant with a degree in "google"
VIN number is in a number of places...
1. Log book
2. Inside windscreen when viewed from outside
3. On plate inside engine compartment
4. on chassis rail
They should all be the same!
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
As 190760 is less than 203805, you are 107 - which makes it the same as most SJs and Vits as well.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
