BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Lock right 1510

  • Snize
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Jan 2012 16:54 #31423 by Snize
Lock right 1510 was created by Snize
I want to install my gimny lock right 1510,I want to do it myself ,I want to know what the risks ? Is there any guide book ?

Please Log in or Create an account to join the conversation.

  • Bigchridy
  • Visitor
  • Visitor
    Public
20 Jan 2012 19:42 #31436 by Bigchridy
Replied by Bigchridy on topic Re: Lock right 1510
www.jimny.se/locker.html

Hope this helps. This is the guide I used when fitting mine.

Chris

Please Log in or Create an account to join the conversation.

  • supergaz
  • Visitor
  • Visitor
    Public
20 Jan 2012 19:50 #31437 by supergaz
Replied by supergaz on topic Re: Lock right 1510
Hi and welcome to the forum.
Don't undo the side bearing lock plate as is done in the guide, as then you will loose the side bearing adjustment. Just undo the 2 big bolts for the bearing caps.

Please Log in or Create an account to join the conversation.

More
21 Jan 2012 12:27 #31479 by zerez
Replied by zerez on topic Re: Lock right 1510
Hi,
I have a general qustion.
I am using my 2006 jimny for off and on road driving. My jimny has an automatic transmition an have the maxxis 751 tieres.
What is the impact of using the 1510 on roads?

Please Log in or Create an account to join the conversation.

  • Romi
  • Visitor
  • Visitor
    Public
10 May 2012 09:40 #39813 by Romi
Replied by Romi on topic Re: Lock right 1510
Hi ,

I have installed 1510 to 2006 Jimny. But the problem is dif. lock is very tight and did not release while parking moves and slow cornering.

We have removed all slug but it is still same; could you advice how we would instal lock right 1510 to work properly?

Thanks,
Oktay

Please Log in or Create an account to join the conversation.

  • supergaz
  • Visitor
  • Visitor
    Public
10 May 2012 15:01 #39839 by supergaz
Replied by supergaz on topic Re: Lock right 1510
Did you use the shim washers supplied? Or doubled up on the shims?
I think you have it shimmed to tight so that it cannot unlock.

I only used to originals and I can spin my wheels by hand and can hear a ratcheting click.

Please Log in or Create an account to join the conversation.

Time to create page: 0.139 seconds
Joomla template by a4joomla