A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
How to fit a steering damper
- myers647
- Topic Author
- Visitor
-
Public
- r_ogilvy
- Visitor
-
Public
07 Dec 2011 20:54 #27501
by r_ogilvy
Replied by r_ogilvy on topic Re: How to fit a steering damper
what i had done was: bolt the extending arm bit to the chassis, pull the shock fully out, make sure the wheels are straight, measure the travel of the shock and half it, then put the shock down to the half way mark then put your bracket on the steering arm and bolt it on.
then full lock the wheels and make sure nothing bottoms out each way, :huh:
then full lock the wheels and make sure nothing bottoms out each way, :huh:
Please Log in or Create an account to join the conversation.
- myers647
- Topic Author
- Visitor
-
Public
07 Dec 2011 21:31 #27508
by Halford
Replied by Halford on topic Re: How to fit a steering damper
Please Log in or Create an account to join the conversation.
- r_ogilvy
- Visitor
-
Public
Time to create page: 0.185 seconds