A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
More fun and games
grumpy22
Topic Author
Visitor
Public
12 Nov 2011 20:01 - 12 Nov 2011 20:02#25620by grumpy22
Cam belt went very well once I'd got the crank pulley off. The rebuild took about 45 minutes
So I decided to investigate some pulling to the left under heavy braking. Usually a sticking calliper and so it turned out to be. But could I get the pin out? Took 3 hours of heat, plus gas pullers, lump hammers drifts, everything I know. Got it out in the end but made a bit of a mess of the sliding pin!,
