A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Exhaust blowing
- zaine
- New Member
-

Public
Less
More
- Thank you received: 0
09 Nov 2011 13:51 #25451
by zaine
Replied by zaine on topic Re: Exhaust blowing
is it not weld-able? mine cracked same place, just cleaned it up, welded the crack, done :laugh:
Please Log in or Create an account to join the conversation.
- Johnniehec
-
- Offline
- Platinum Member
-

Registered
Less
More
- Posts: 691
- Thank you received: 56
09 Nov 2011 16:37 #25461
by Johnniehec
That's where mine went, took it off and welded it, there seems to be plenty metal there that was just before the MOT two years ago.
John.
On the 8th Day God made the LandRover -
On the 9th day he swapped it for a Jimny.
Replied by Johnniehec on topic Re: Exhaust blowing
Az1987 wrote: Mine went not to long ago as well, mine went where the front pipe enters the CAT I had mine welded back up and it's still going strong now 5 months latter.
That's where mine went, took it off and welded it, there seems to be plenty metal there that was just before the MOT two years ago.
John.
On the 8th Day God made the LandRover -
On the 9th day he swapped it for a Jimny.
Please Log in or Create an account to join the conversation.
Time to create page: 0.241 seconds
