A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Removing/replacing the wheel arches
- jjg4
- Topic Author
- Visitor
-
Public
30 Sep 2011 14:54 #22824
by MigCooper
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Replied by MigCooper on topic Re: Removing/replacing the wheel arches
I don't think there is and you will probably brake a few clips (I did anyway) and the thing is a bit loose now probably because as well as the broken clips they also have a less support.
Just be patience and pull it off gently one by one .... best advice I can give anyway ...
Just be patience and pull it off gently one by one .... best advice I can give anyway ...
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Please Log in or Create an account to join the conversation.
30 Sep 2011 16:05 - 30 Sep 2011 16:06 #22835
by Halford
Replied by Halford on topic Re: Removing/replacing the wheel arches
Hi Julian
welcome to BJ
not taken them off myself, but thought these might help
welcome to BJ
not taken them off myself, but thought these might help
Last edit: 30 Sep 2011 16:06 by Halford.
Please Log in or Create an account to join the conversation.
- X-Eng Simon
- Visitor
-
Public
30 Sep 2011 18:13 #22851
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Re: Removing/replacing the wheel arches
Mine came off and went back on without breaking, I had to lie underneath and remove the sill part first, then there were some bolts and expanding rivets before the arches would pop off.
I likely slid a credit card between the arch and wing, then used a flat screwdriver to pop the fasteners.
The arch is stuck with a sort of double sided foam to keep water from running down the wing behind it. Mine isn't now :blink:
I likely slid a credit card between the arch and wing, then used a flat screwdriver to pop the fasteners.
The arch is stuck with a sort of double sided foam to keep water from running down the wing behind it. Mine isn't now :blink:
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- jjg4
- Topic Author
- Visitor
-
Public
Time to create page: 0.147 seconds