A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Did my kingpin's
30 Jan 2010 18:03 #2090
by Jamie
Did my kingpin's was created by Jamie
What a horrible job i stink of grease/oil. Thank's for the bearing
kit Martin just the job,however, whilst under there i noticed
the other side has just started weeping
I took a couple of photo's of my car showing something extra to remove
it is the ABS sensor!! Also took a photo of the hub which clearly shows
the ABS ring.
This is the rear view showing the sensor to remove
kit Martin just the job,however, whilst under there i noticed
the other side has just started weeping
I took a couple of photo's of my car showing something extra to remove
it is the ABS sensor!! Also took a photo of the hub which clearly shows
the ABS ring.
This is the rear view showing the sensor to remove
Please Log in or Create an account to join the conversation.
30 Jan 2010 19:45 #2093
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Did my kingpin's
I cannot stand the smell at all either.
Nice pictures of the ABS sensor and ring, of course most of us with the earlier cars do not have that problem
Martin
Nice pictures of the ABS sensor and ring, of course most of us with the earlier cars do not have that problem
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- ryansjimny
- Visitor
-
Public
02 Feb 2010 15:40 #2122
by ryansjimny
Replied by ryansjimny on topic Re:Did my kingpin's
I have an ABS equiped Jimny, rear bearings are a nightmare as you have a special bearing lockring that the ABS ring 'cog thing' presses onto. If these two parts are damaged the resuly is mega bucks!
Please Log in or Create an account to join the conversation.
Time to create page: 0.133 seconds