A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Need apicture of facelift heater box
- toph
- Topic Author
- Visitor
-
Public
27 Jul 2011 16:04 #19584
by toph
Need apicture of facelift heater box was created by toph
hello,
I am looking for a photo of a facelift heater box as seen from the drivers footwell, i need to see the white plastic cams that move with the wire/rods.
Only one I can find is from a pre-facelift which isnt quite the same.
I am looking for a photo of a facelift heater box as seen from the drivers footwell, i need to see the white plastic cams that move with the wire/rods.
Only one I can find is from a pre-facelift which isnt quite the same.
Please Log in or Create an account to join the conversation.
- lukeyblunt
- Visitor
-
Public
27 Jul 2011 17:23 - 27 Jul 2011 17:24 #19588
by lukeyblunt
Replied by lukeyblunt on topic Re: Need apicture of facelift heater box
i have a 54 plate.. are these pics of any help?
(tilt head left- sorry)
If not, no worries. It's no trouble - or maybe it'll help someone else !
Could someone tell me the difference in facelift and prefacelift.. as it's not obvious to me. :huh:
Attachment front.png not found
Attachment heatercomponents.png not found
(tilt head left- sorry)
If not, no worries. It's no trouble - or maybe it'll help someone else !
Could someone tell me the difference in facelift and prefacelift.. as it's not obvious to me. :huh:
Attachments:
Last edit: 27 Jul 2011 17:24 by lukeyblunt.
Please Log in or Create an account to join the conversation.
- toph
- Topic Author
- Visitor
-
Public
27 Jul 2011 19:34 - 27 Jul 2011 19:37 #19605
by toph
Replied by toph on topic Re: Need apicture of facelift heater box
Hello, thanks for the response, the "face lift" is the one with dashboard that has a double din radio and the controls for the fan and AC are round (old shape has sliders)
The reason I ask is, the cable/rod has popped off on the side of the heater box and I need to work out where the cable goes to again, the "facelift" model has an additional control on the side of the heater box due to the shape of the dash carrier.
The reason I ask is, the cable/rod has popped off on the side of the heater box and I need to work out where the cable goes to again, the "facelift" model has an additional control on the side of the heater box due to the shape of the dash carrier.
Last edit: 27 Jul 2011 19:37 by toph. Reason: can't spell for shiz
Please Log in or Create an account to join the conversation.
- SPC5838
- Visitor
-
Public
27 Jul 2011 21:29 - 27 Jul 2011 21:30 #19613
by SPC5838
Replied by SPC5838 on topic Re: Need apicture of facelift heater box
The front bumper is the easiest way of telling from the outside Lukey - the facelift has the, for want of a better word, Imprezza style (?) bumper
If you can wait till tomorrow night toph I'll get you a pic.
If you can wait till tomorrow night toph I'll get you a pic.
Last edit: 27 Jul 2011 21:30 by SPC5838.
Please Log in or Create an account to join the conversation.
- toph
- Topic Author
- Visitor
-
Public
27 Jul 2011 22:10 #19614
by toph
Replied by toph on topic Re: Need apicture of facelift heater box
SPC5838- thanks
Please Log in or Create an account to join the conversation.
- adamatdraycott
- Visitor
-
Public
28 Jul 2011 04:55 #19617
by adamatdraycott
as with everything Jimny, there was slight overlap between the new dash and the new front bumper... there are a few 54 and 05 plates around with the old shape bumper but new and dash.
Replied by adamatdraycott on topic Re: Need apicture of facelift heater box
SPC5838 wrote: The front bumper is the easiest way of telling from the outside Lukey - the facelift has the, for want of a better word, Imprezza style (?) bumper
If you can wait till tomorrow night toph I'll get you a pic.
as with everything Jimny, there was slight overlap between the new dash and the new front bumper... there are a few 54 and 05 plates around with the old shape bumper but new and dash.
Please Log in or Create an account to join the conversation.
Time to create page: 0.151 seconds