A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Vit FWH fitting.

More
17 Jun 2011 06:42 #17925 by mcjimny
Vit FWH fitting. was created by mcjimny
Do vit manual hubs go straight on or do i need the spacer ring?
Are there any differences i should be aware of ie spline count?

Black Jimny's don't get stuck!

Please Log in or Create an account to join the conversation.

More
17 Jun 2011 10:03 #17933 by mlines
Replied by mlines on topic Re: Vit FWH fitting.
You need a spacing ring, they then fit straight on. Thats exactly what I have on mine.

Spacer rings....

www.bigjimny.com/store/index.php/jimny-p...b-adaptors/p_15.html

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
17 Jun 2011 13:27 #17941 by mcjimny
Replied by mcjimny on topic Re: Vit FWH fitting.
cheers martin,

a guy i know is breaking a vit so hopefully i'll get a good deal on the hubs.

Black Jimny's don't get stuck!

Please Log in or Create an account to join the conversation.

Time to create page: 0.176 seconds
Joomla template by a4joomla