A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Hello all, this is my first post on here and i'll get round to adding pictures of my Jimny soon. cage, winch bumper,3" KAP lift,2" body lift and a few homemade touches!
What im wondering is if anybody has any suggestions what I should do with the remaining hoses and vacume system after adding manual hubs? I've just ordered the adapter rings on here and want to make sure its all a proper job when I fit them!
Thanks.
I left everything in place on mine. The SJ hubs seal down ok to the Jimny hubs so the vacuum system still works and lights the dashboard lights ok.
I know others have removed the pipework and sealed the ends using an appropriately sized nail and some sealant
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
